Jika Baths

A week after installation, rust was spotted, a month later these points become larger.

There are no pluses.

Acceptable price.

In the bathroom, all the plumbing from the company Jika is absolute. We bought it for a long time, more than 5 years, no problems were caused. Of course there were minor breakdowns, but the general impression of the manufacturer is not spoiled from this. I chose all the components from one series, under the name Lyra, I really liked the design - all the lines are smooth, without sharp corners.

As for the bath, then I had the most doubts at the time of purchase. The price was much lower than that of other manufacturers. After all, with acrylic bathtubs there are so many problems, but I decided to take a chance and take it. Honestly, I did not lose in this regard. It looks good after 5 years, the acrylic does not deteriorate, is not scratched, the color is still the same white. I look at it every day and rejoice, now I advise everyone to this brand and do not understand when they buy more expensive brands, because the quality is the same, but why then overpay.

Cost and good quality

Simple model

Just the other day I bought a steel bath from the manufacturer JIKA, the model is called Praga, sizes 180X80. I started installation, and here, I see that the legs do not fit tightly into the bathtub. I looked at the instructions, made sure that it should be so, screwed the legs to the bath and decided to try it out.

Swim, I liked it. I got out of the bath and began to wipe it (as was written in the instructions, from the formation of a plaque) and then I saw that a chip had appeared. I began to examine it and realized that it had formed at the place where the legs adjoin the bath.

I called the salon, an expert arrived and it turns out my case is not a guarantee. It was necessary to install damping pads. Although there was not a single word about this in the instructions. in short, I won’t advise you, as the quality of the product is poor, the attitude towards customers also leaves much to be desired. And I can only go to court.

price

the instruction is not finalized, the chip appeared on the first day, the attitude towards customers is bad

I thought for a long time to which plumbing manufacturer to give my preference, as a result, we compare all the arguments for and against decided to take Jika. I must say right away they are not cheap. I bought a bath with the name Olymp, the dimensions of 145x145, angular. The bottom of the bathtub turned out to be not so thick, the maximum depth intended for drilling holes for fasteners of the legs is 5 mm. The production of Czech baths takes place according to the following scheme: molten acrylic is formed in a given shape in a special vacuum chamber at a given temperature.

In general, the bath is not bad, it keeps warm, it is convenient to use, for a child this is how the mini pool turned out. Of course, I can’t say with confidence that the quality of the bathtub is at its best, since the operating life is not so long yet, but nevertheless my family uses the bathtub with pleasure, let's hope that it will not disappoint.

- large dimensions
- acrylic is not of poor quality
- keeps warm

- expensive
- the bottom is not thickened