When choosing a pumping station, it is important to consider the lift height, suction depth and its performance. But it is also important to select proven equipment that can last for many years and withstand temperature changes and various water quality, which will help our rating of the best pumping stations for a private house, collected on the basis of key characteristics and user reviews.

top pumping stations rating

The best pumping stations with a suction depth of 8 meters

Since pumping stations are installed on the surface, it is first necessary to pay attention to such an indicator as the suction depth. Therefore, before choosing a station, you need to know exactly how many meters from the surface of the well or well to the water mirror. If this indicator is less than 8 meters, then these pumping stations can be used.

Despite the modest performance, such pumping stations are capable of pumping up to 50 liters per minute, which covers the needs of a house with two sinks, a toilet and a bathroom. Here are the best models from this category.

 Grundfos Hydrojet JPB 5 24 sGrundfos MQ 3 35 sGARDENA 3000 4 Classic 1770 sMarina CAM 80 22 s
Grundfos Hydrojet JPB 5/24 Grundfos MQ 3-35 GARDENA 3000/4 Classic (1770) Marina CAM 80/22
 
 
Maximum head, m 40 33,8  40  32 
Throughput, m3/ h 3 3,9  2,8  3,6
Power consumption 775  850  650  800 
Weight, kg 17,1  13  12,5  12 
Dry running and overheating protection  yes  yes  yes  yes

Grundfos Hydrojet JPB 5/24

High-quality pumping station with a capacity of 775 watts with a reservoir for storing water under pressure of 24 liters. The impeller is located in a stainless steel housing and is protected against corrosion.

Grundfos Hydrojet JPB 5 24

 

+ Pros of Grundfos Hydrojet JPB 5/24

  1. A reliable model that works every day for most users for 8-10 years.
  2. The pump station is able to withstand continuous operation for 72 hours.
  3. Fully automatic operation.
  4. Easy connection to subsequent communications thanks to 1 inch thread.
  5. Compact dimensions 28x66x50 cm are easy to place in a small well or insulated box.
  6. Inside, protection against working in the “dry” mode is built-in - the device will not turn on if there is no liquid in the system.
  7. During overheating, the pump station will shut off to protect the engine from combustion.

 

- Cons Grundfos Hydrojet JPB 5/24

  1. It is distinguished by a loud work, so do not mount near the living rooms or under them.
  2. Some users have failed thermal relay.
  3. At the slightest depressurization (a loose pipe, a crack in the hose, air leaks in the tap), the water level goes away and subsequent start-up is complicated.

Output. Reliable pumping station, perfect for organizing water supply in a private house used for permanent residence. Thanks to its compact size, it is easy to install outside the house, in the pit or in a separate building.

 

Grundfos MQ 3-35

Pump station without accumulator. It is carried out in a stainless steel case. The electronics box is integrated at the top under the rubber cover. Consumes 850 watts per hour.

Grundfos MQ 3 35

 

+ Pros of Grundfos MQ 3-35

  1. In an hour of work, pumps almost four cubic meters of water.
  2. It supplies water with a pressure of 33 meters, so it is suitable for a two-story house with several selection points.
  3. High-quality powder coating of the case better protects it from corrosion, especially when installed in the basement.
  4. Although the device is designed for clean water, but when hit by rust, it does not fail.
  5. There is an automatic protection against overheating or dry start.
  6. Able to keep constant pressure regardless of flow rate.
  7. Fully electronic control with clear operation.

 

- Cons Grundfos MQ 3-35

  1. Poor equipment - there is nothing (filters, bolts for attaching to the base).
  2. Given the lack of a hydraulic accumulator, the station turns on much more often, which increases energy consumption.
  3. High noise level - mount only away from the bedroom.
  4. Inside there is a rough filter element closed with polyethylene - this is not written anywhere, and many forget to remove it during installation, which contributes to a longer initial start-up.
  5. Condensation builds up inside the motor, causing the bearings to oxidize and wear out faster.

Output. The pump station is well suited for organizing water supply in a one-story or two-story country house used for permanent residence. Dimensions allow you to place equipment in a cellar or niche under the floor. The unit will cope with the simultaneous maintenance of 3 points of water intake.

 

GARDENA 3000/4 Classic (1770)

Pump station in one-piece housing and with a plastic pump housing. The engine is equipped with clever perforations for better air cooling. Motor power is 650 watts.

GARDENA 3000 4 Classic 1770

 

+ Pros GARDENA 3000/4 Classic (1770)

  1. It is capable of lifting water up to 40 m to one sampling point - for two sinks and a shower on the ground floor this is enough with your head.
  2. Shakes on 2.8 m3 in hour.
  3. Light weight 12.5 kg with tank.
  4. Very high-quality assembly and compact design.
  5. A fine filter is integrated between the pump and the expander.
  6. Although the instructions say that it is suitable only for clean water, but some even rocked them with wells (they pumped until the clean one goes).
  7. It functions well with warm water up to a temperature of +35 degrees.
  8. Automation controls the water level in the tank.

 

- Cons GARDENA 3000/4 Classic (1770)

  1. At the inlet and outlet are plastic nozzles with delicate threads that are easy to twist with a little more effort.
  2. If the removal of the pumping station is planned for the winter, it must be borne in mind that it is difficult to completely drain the water from all corners - because of this, it cannot be left in a place where there may be frost.
  3. To clean the internal filter, you need to disassemble a lot of parts.
  4. Complicated first start-up due to poor fluid intake.
  5. If the engine burns out, and the device is no longer under warranty, you will have to look for the master yourself, because in the service center the engines are not being repaired, but are replaced in assembly with the station.
  6. Short power cord 1.5 m.

Output. Excellent pumping station for a seasonal stay. Due to the large number of plastic elements on the case, it better absorbs vibration and makes less noise, so installation under living rooms or next to them is allowed. Soft start of the engine also contributes to a softer start of work without power surges.

 

Marina CAM 80/22

Pump station from an Italian manufacturer. The engine power is 800 watts and the performance is 3.6 m3 in hour. All external parts, including overflow hose, are metal.

Marina CAM 80 22

 

+ Pros of Marina CAM 80/22

  1. Long service life - 10-13 years, with proper care.
  2. It creates excellent pressure, which is enough for 3-4 selection points at the ground floor level.
  3. It is convenient to fasten to the semi-base - the outriggers are long and convenient to climb with a screwdriver to tighten the screws.
  4. Dry run protection is provided - the station simply will not turn on.
  5. Compact dimensions 28x50x50 cm are easy to place in a limited space.

 

- Cons Marina CAM 80/22

  1. Over time, the pressure switch channels become clogged with dirt and work worse - cleaning is required.
  2. It is very sensitive to voltage and needs to be connected to the network through a stabilizer, otherwise you can sit for a long time without water in a private house.
  3. Weak rubber chamber in the accumulator - periodically needs to be replaced.
  4. In a black box on top of the case, capacitors sometimes swell up, which evaporate and change to new ones - they are cheap.

Output. The pump station will cope with the supply of water to the bathhouse or as a pump for the plumbing in the garden. The casing is powder coated to protect steel from corrosion.

 

The best pumping stations with a suction depth of 25-30 meters

The peculiarity of these pumping stations is that they have a submersible ejector, which is lowered into the wellbore or well and allows you to raise water from a great depth. It is necessary to pay attention to the diameter of the ejector, as it is not suitable for small diameter wells. If the water mirror is below the level of 8 meters, then you need to use pumping stations of this type or look towards submersible pumps.

 Marina Speroni APM 100 25 sQUATTRO ELEMENTI Automatico 800 Ci Deep 645 280 s
Marina-Speroni APM 100/25 QUATTRO ELEMENTI
Automatico 800
Ci Deep 645-280
 
 
Lifting height, m 32 40 
Suction depth, m 25 30
Throughput, m3/ h 2,4 2,5
Power consumption 1100 800
Weight, kg 27 20,2
Dry run protection  no  no

Marina-Speroni APM 100/25

The main difference of this pumping station is a cast-iron casing, more resistant to freezing temperatures and better damping vibrations.

Marina Speroni APM 100 25

 

+ Pros of Marina-Speroni APM 100/25

  1. It pumps pressure from 1.6 to 3.2 atm.
  2. It tolerates freezing well - after thawing it works without problems.
  3. The life of some users reaches 10 years.
  4. Thanks to cast iron, the rumble of a powerful motor is a little quieter.
  5. In practice, boldly pulls water from a depth of 20 meters and pushes it away for another 30 meters.

 

- Cons Marina-Speroni APM 100/25

  1. There is no protection against running without fluid.
  2. When the relay channels from hard water become clogged, it stops turning off and disassembly and cleaning are required.
  3. An uninformative instruction - it does not even describe that two hoses (1.0 inches and 1.5 inches) are required to be inserted into the well.

Output. Good pumping station for a private house. A powerful 1100 W engine easily copes with its task - the device pumps up to 40 liters in one minute.

 

QUATTRO ELEMENTI Automatico 800 Ci Deep 645-280

The Italian brand with assembly in China, therefore, has an affordable cost. It features an 800 W engine capable of pumping 41 liters per minute, and the reservoir for maintaining pressure holds 20 liters.

QUATTRO ELEMENTI Automatico 800 Ci Deep 645 280

 

+ Pros of QUATTRO ELEMENTI Automatico 800 Ci Deep 645-280

  1. Easily pumps water with a temperature of +5 degrees.
  2. Pumps pressure 1.5-3 atm.
  3. It weighs relatively little - 20 kg, which facilitates the descent and installation inside the well.
  4. The cast-iron casing better dampens vibrations and tolerates low temperatures.
  5. It has a long service life.
  6. In the absence of water and unspecified protection against dry start it can work for more than a day, heat up, but will not break.
  7. Performance is enough for 6 points of the fence.

 

- Cons QUATTRO ELEMENTI Automatico 800 Ci Deep 645-280

  1. There is no protection against dry running, but it is possible to independently connect an additional relay.
  2. There is no filter in the ejector, so you have to buy it separately.
  3. Short power cord.
  4. The accumulator membrane stinks strongly with rubber, some users decided to replace it
  5. The flange is made of thin metal and is very rusty for a couple of years.
  6. It is impossible to attach a conventional fitting or HDPE tube to the ejector - you have to heat them with a building hair dryer and pull them on.

Output. This pumping station is able to draw water even from a depth of 30 meters and push it 40 meters. At the same time, a power of 800 W will moderately consume electricity.

 

Copyright © 2019 - techno.expertexpro.com/en/ | chinatownteam2016@gmail.com

Technics

Tools

Furniture