Roof decking

He installed the corrugated board on his roof in the spring, he made a choice based on pricing policy. The tile comes out more expensive, and the slate is already very fragile. It stands and pleases while outwardly does not lose anything to the previous options, it looks decent, beautiful. The sheet chose a thickness of 0.5, the price goes budget, it can’t hit much in the pocket, which is nice.

As for noise insulation, it has already been checked, everything is fine during rain, there is no strong ringing.

Installation is much easier and faster than going with the same tiles. In general, I have from this coverage only the most positive emotions are caused. Decking is really not bad for these purposes. Beauty, price, ease of installation, good sound insulation, that’s how much positive - I’m all for it!

Lot

Not looking

To cover the roof at the dairy farm, our team leader chose an inexpensive, affordable material - roofing sheeting made of galvanized metal. It has a lot of positive characteristics: it is light (5 - 7 kg per square meter), durable (due to the stiffener), is not afraid of precipitation. Its service life is equal to the service life of metal, but installation is much easier and faster in time.

Suppliers have prepared sheets of the right length for us, which is very convenient and economical. Last winter showed that the roof from the profile coating steadily endured huge snow loads and strong hurricane winds. In the spring, nothing had to be repaired or tinted. Decking really turned out to be very practical and in all respects profitable material.

durability, frugality, practicality

not detected

My aunt gave me a country house. For 50 years, she blocked the roof there three times with slate. I did not want to bother, because I took a decking for the roof, which the neighbors highly recommended the aunts. It looked mediocre, but it turned out to be easy, proved to be excellent in use.

The only major flaw: noise. For 2 years, the material had to suffer with heat and frost, and to withstand the hail. No damage, leaks. I achieved this without any problems, just followed the installation technology. I chose this scheme: a vapor barrier + rafter leg + 150 mm insulation and specials. membrane (to prevent condensation) + counterrail of 30 mm + crate 60x40 with a step of 50 cm + profic. He acted carefully, because the surface is easy to scratch, causing corrosion.

shock resistant, low weight, low cost

moody in styling, noisy, modest appearance