Metal tile with a profile of Monterrey

Last year, the bathhouse was completed, and it was urgent to decide which roof we would choose for it. After weighing the pros and cons, they decided to stop their choice on the Monterrey metal tile.

Her husband and her comrades laid, they initially made the crate, and then began to fix the tiles. The size of the standard sheet is 1186 mm, the working width (distance to the lock) is 1100 mm. They mounted the sheets with an overlap, and they fit tightly to each other, so that as a result there are no joints, the roof looks like a single canvas. They laid the metal tile in one direction, while you need to be careful, because when throwing a sheet on the roof, they can easily get scratched and jammed. Sheets are very thin and light.
As a result, the roof turned out exactly the same as we wanted! She is beautiful, looks wonderful, in the color of dark chocolate.

- large color palette
- the paint does not peel off
-very beautiful looks.
- locks are well closed (it depends on the manufacturer)

- Easy to bend and scratch.
- rattles during heavy rain (without insulation)

I live in a private house that is many years old. The roof is covered with slate for a long time. The roof covering, during operation, worn out. I, at the family council, decided to change the cover on the roof of the house.
Recently, I spied that my neighbor blocked his house with metal tiles. I asked my wife (she often communicates with a neighbor) to find out where the neighbor bought the material for overlapping and what brand goods.

My wife found out that the metal tile manufactured by MetalProfile with the profile "Monterrey", and purchased in a hardware store in our area.

The roof helped me block the godfather with a neighbor. We managed in just a few days without experiencing any particular installation difficulties. The wife chose the color of the metal tile green - red, as she did not like at her neighbor.

not complicated installation, a large selection of colors.

are absent.

2 years ago they built a garage near the house. When choosing a roof covering, we went through many options. We opted for the Monterrey metal tile, due to the ease of installation and operation. Installation as a whole was not difficult. The only problem was fitting the groove into the groove, but it went pretty easy.

The appearance of the roof after construction was pleased. It turned out to be concise and aesthetic and fully fit into the overall design of the garage and the house.
The choice of color for us was the most difficult task.Choose from a variety of color palettes before deciding to order mahogany (chocolate). The Monterrey metal tile is of high quality, it looks very good, as it has been used for 2 years.

- ease of installation;
- attractive appearance;
- ease of operation.

- the difficulty of fitting groove into groove;
- average noise isolation

As a material for the roof of the house, we chose the Monterey premium metal tile. For the first time I saw a roof made of this material in a neighboring cottage. I liked it so much that I decided to find out more about the material, price and manufacturer. I really wanted to decorate my house with such a coating.

It turned out that the neighbors' roof was not made of natural tiles, although, at first glance, it was impossible to determine. She looked exactly like natural. They did the coating two years ago. There are no comments since the installation day. But most of all I was surprised when they announced the price.

Knowing the real value of the Finnish metal tile, I thought it was a joke - it’s too cheap. But it turned out that Monterrey Premium is being produced at our subsidiaries in Russia. Therefore, the price is much lower.
For more than six months, our house has been protected by Monterrey Premium, which I give the highest rating in all respects.

reliable protection, excellent design, reasonable price

not