Motoblocks Kubanets

I ordered a walk-behind tractor in an online store, after a long study of those characteristics. I came in a disassembled state, I had to collect everything. Assembled, run in as indicated in the instructions for use. I milled 5 acres of the garden, changed the oil in the gearbox, added it to the motor, tightened the bolts on the transmission, adjusted the clutch. In general, I did everything as I should. While I skated the second season, at the same time I loaded quite thoroughly, especially during transportation. Pulls even into a steep hill rather quickly and without weighting.

Gear reducer and transmission are made thoroughly and efficiently;
The engine is solid more than 100 kg, with wild compression;
Good big wheels, set through the key, excellent traction even with wet soil;

The assembly instructions are missing as a fact, it’s good that this is not my first walk-behind tractor, otherwise it would have remained in the box;
Painting leaves much to be desired, had to be repainted after six months so as not to rust;
Handles with wild play, had to add washers.

I recently bought a walk-behind tractor, since our soil is heavy, and I had to raise virgin soil - a thick layer of turf + wheat grass. On the advice of knowledgeable comrades, he chose a harder walk-behind tractor. In the store I liked the Kuban MB 135 DE. He came up, looked, liked it. Bought in installments. Now completely all the work of cultivation and plowing only on it. You have no idea what a simplification of housekeeping.

powerful motor of 9 horses, weight under 180 kg - no weighting materials are needed as it goes and it doesn’t pop out of the ground, diesel fuel, but I fill it with quality, it’s a pity if the motor clogs

in the standard set only active milling cutters and a plow the rest needs to be bought, an electric starter

Recently I went to a store of agricultural implements and garden equipment, began to ask the price of walk-behind tractors, as I was tired of picking the ground with a shovel. My budget is quite modest and I wanted to take something with a minimum bundle, so that after receiving the money, I could buy it, and ideally do it myself. With equal technical characteristics, it turned out to be 5 thousand cheaper than fireworks. In addition, it also has some design advantages. All components are fully domestic production including the motor. While producing run-in and quite happy with the result. At medium power it pulls quite well.

six-sided wheel shaft (and not round like salutes), unpretentious to fuel and oil

the motor is also domestic, while pulling, but clearly simpler than the Subarovsky and very noisy, the controls are pretty tight, but maybe I haven't gotten used to it yet