Motoblocks Plowman

Motor-block average on characteristics

Worked for 6 years

Gear case - silumin cast scattered around the second gear of the gearbox in the 7th year of operation. The gears themselves, without comment, are like new. An attempt to order a new gearbox on the manufacturer’s website ended in scam after transferring 14,000 rubles. Contacting law enforcement agencies is useless in the conditions of the Kursk will still not be verified by life experience.

I have been using the walk-behind tractor for over 7 years. except changing the oil --- did nothing else. The modem is designed for light work. on light soils. for heavy soil I have a Neva-MB 23 walk-behind tractor ... output ---- each t

buy and work. 10-15 hundredths of a garden for this walk-behind tractor --- to process quite realistically without any difficulties!

lightweight and comfortable. A teenager can control this walk-behind tractor. protection of mills is well executed. the earth does not fly in the face. it means safely evil eyes!

light is not intended for heavy soil - for heavy soil, a middle class walk-behind tractor needs a weight of 100 kg. This is a Neva or cascade walk-behind tractor

The engine’s pulling forces were high. Break-in took place on the virgin soil. The walk-behind milling cutter and its power easily coped with the turf. The weight-lifting gear was mounted on wheels, the wheel track was widened. When plowing, the plow used rubber wheels with weighting agents on rubber wheels. The metal from which assembled walk-behind tractor is not shaky. I liked the build quality. It’s convenient to shift gears with your foot if you use mills or a plow. They switch easily and clearly. The trolley was not used. The pin in front of the walk-behind tractor is very convenient. It can easily accommodate weights to drive as part of the trolley and harrowing.

I would like rubber wheels at least 4.5-10 more. Small, convenient to fit in a small room, which is very convenient for the site where construction is just beginning. There is a power take-off pulley for belt transmission. It is very convenient for low-cost mounted equipment. The clutch works smoothly, walk-behind tractor is slowly moving away. A coulter that is sold with walk-behind tractor is convenient for moving around the area and parking. This walk-behind tractor in my opinion is better than the quality of the Neva. Prior to buying this walk-behind tractor there was an experience of using the walk-behind tractor Neva .. eychas "Neva" put into the design plane.Kachestvo spring clutch and gas not vysote.V 2010 "Neva" to make quality their tehniku.Na my opinion and experience with this type of walk-behind tractors, walk-behind this deserves attention.

High-torque, powerful, high-quality gearbox. High-quality frame. High-quality painting. Rubber good shock-absorbing handles. Convenient steering wheel adjustment.

Tight gas. It is inconvenient to change one of the attachments of the cutter and wheel. It vibrates strongly in the middle range of crankshaft rotation.

I bought the MKM-3 Lander walk-behind tractor in 2010. During this time, he thoroughly studied and felt it. Despite some shortcomings, the machine is very useful. Convenience in management was especially pleased that for me as the disabled person 3 groups are important. The main work that I spend, milling, hilling and digging potatoes and all this on heavy clay soils.

All the weight falls on the wheels (zero weight distribution), convenient control, easy to start, change gears, etc., a large selection of attachments, a reliable engine and gearbox (assembled at an aircraft factory), there are main and transport wheels, it is quickly disassembled into transport condition, light weight, 65 kg, allows you to independently move the walk-behind tractor in the trunk

The build quality is disgusting, I had to sort it out with my own hands. The tension roller mount just flew off, I had to weld again;

The tension roller bearing is dry, after an engine stop for another 30 seconds it rotates with a whistle;

The drive belt tore during the break-in - replaced with a car toothed.

During operation, only 3 main disadvantages were revealed, but they spoil the whole impression of the walk-behind tractor. There is only one conclusion - it will work but it’s not worth the money.

The Subaru engine is beyond praise, the Omsk gearbox is a reliable mechanism, a convenient clutch handle, a spectacular appearance - which I bought.

The biggest drawback is the drive belt with section A, you can put only one, since the driven pulley has only one stream. And this is on the motor, which with a maximum power of 5.1 kW produces 4000 rpm. I tried to put the belt of section B, but not to put in place the belt guard, as a result the belt was unraveled in 10 minutes. On the day of intensive work with maximum loads, it takes up to 3 days.
Drawback 2 is a specific coupling box, on which attachments of manufacturers of Salutes or Neva do not become. They probably expect that all the canopies will be bought only from them.
Drawback 3 - poor-quality general assembly. I had to sort through everything in the cog, hold out, pull up, change the fasteners.

This year I purchased a walk-behind tractor through the manufacturer’s online store. Came quite quickly and fully loaded. Yesterday I finished the assembly and immediately share my impressions. In the minimum set were: brake pin, support wheels for transportation, extension cords for axle shafts (as later turned out for lugs, not wheels), all sorts of keys and screwdrivers (a trifle, but nice). An engine oil level sensor is installed on the engine, not a carburetor, a special device to facilitate starting the engine in winter. If you do not need to unscrew and put a plug on the fitting.

After receiving, I tried to tighten all the nuts - it didn’t need to be tightened well. According to the advice from the forums, I drained the oil from the gearbox and measured, the volume is about 1 liter as indicated in the operation book. Filled back, checked engine oil, everything is normal. The engine started up on the second jerk with an open air damper. 10 min average speed 10 min full throttle and all dry run-in passed.

Good equipment and instructions, easy to start, powerful motor.

Until revealed, we will look.

This season I bought a Plowman motoblock model MKM-3 with an engine LL 168 F-1A. It suits me in all respects and in power, and in compactness, and in weight. Engine oil is at the normal level, but I have not found how much it should be in the gearbox. Topped with nigrol 80W90. Run in, as indicated in the instructions. By the way, the instructions are all detailed with pictures, all point by point, just read. 10 minutes of idling with half a turn, then succumbed to gas and at full power for 1-2 minutes. When the oil darkened, changed. Poured new synthetics from good ones. Last year, he dug up a virgin garden of 20 acres, killed a half of the autumn on it. This year we are milling in the break-in mode - 10 minutes, rest for 10 minutes, processed in a couple of hours. And I have no idea what I did not buy before.

Powerful, economical, compact

It is unclear to what level oil is poured into the crankcase.