Consider the best Russian punchers. This list is based on feedback from users who have already tried the technique in their work. Also taken into account the technical characteristics of the tools.
Choose a hammer drill according to your needs. If this is a rare home repair, but an inexpensive device with a horizontal engine will do. For professional use and high loads, it is worth choosing an option from more expensive and powerful vertical models. Please note that all hammer drills of Russian brands are now produced in China. Therefore, do not be surprised when you see the corresponding mark on the packaging - this is not a fake.
The selection of goods was carried out on the basis of reviews, opinions and ratings of users posted on various resources on the Internet. All information is taken from public sources. We do not cooperate with manufacturers and trademarks and do not call for the purchase of certain products. The article is for informational purposes only.
The best rotary hammers of Russian brands with a horizontal arrangement of the engine
Such punchers are more suitable for domestic use - for home, garden, garage. They are compact and comfortable to hold in one hand. Hammers of this type quickly and easily cope with simple operations. They cost less than rotary hammers with a vertical arrangement of the engine. Consider the most successful models of such punchers of Russian production.
 |  |  |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Caliber EP-800/26 | Union PES-25101 | Bison ZP-28-800 K | Bison ZP-32-1100 K | Interskol P-22 / 620ER | |||||||
| Maximum impact force, J | 3,2 | 4 | 3,2 | 3,4 | 2,2 | ||||||
| Power, W | 800 | 1000 | 800 | 1100 | 620 | ||||||
| Impact rate, bpm | 0 - 4000 | 0 - 4400 | 0- 4800 | 0 - 5100 | 0 - 5060 | ||||||
| Spindle speed, rpm | 900 | 0 - 1100 | 0 - 1200 | 0 - 920 | 0 - 1100 | ||||||
| Reverse | turning brushes | electronic | turning brushes | turning brushes | electronic | ||||||
| Weight | 3,2 | 4,87 | 3,45 | 3,4 | 2,5 | ||||||
Caliber EP-800/26
This rotary hammer operates in three modes: conventional drilling, with impact, chiselling. The SDS-Plus system is installed: it serves for quick and easy replacement of equipment. There is a reverse, so when jamming the device is easy to remove from the material.
- Power - 800 W
- Impact Strength - 3.2 J
- Weight - 3.2 kg
+ Pros Caliber EP-800/26
- low price;
- cartridge and drills included;
- hardy;
- powerful in its class;
- interchangeability of parts from Bosch;
- easy;
- ergonomic;
- convenient reverse;
- long rubber cord with swivel on the handle.
- Cons Caliber EP-800/26
- strong smell of plastic;
- burrs on the body;
- flimsy case;
- sometimes drills and chisels fly out of the cartridge;
- quickly overheats, sometimes there is a smoke.
Output. This puncher copes with brick walls without difficulty, it is a little harder to punch a concrete monolith. Drilling with a drill (D20) in concrete is excellent. Not for professional use. After 30-40 minutes of work, you have to wait until the tool cools down.
Union PES-25101
The model works in three standard modes. It is well equipped, which allows you to immediately get to work without searching for additional equipment.
- Power - 1000 W
- Impact Strength - 4 J
- Weight - 4.87 kg
+ Pros Union PES-25101
- easy;
- powerful;
- convenient switches;
- good equipment: case, 3 drills, chisel, grease and limiter;
- nice appearance;
- price-quality ratio;
- 3 year warranty.
- Cons Union PES-25101
- flimsy switch to reverse;
- noisy even in drilling mode;
- chemical smell from the suitcase and the puncher itself;
- case and latches are plastic, not reliable;
- Heats up with long work.
Output. Budget but powerful option. Suitable for easy dismantling, drilling, housework.
Bison ZP-28-800 K
The rotary hammer is equipped with an advanced hammer mechanism. This gives him high performance. The additional handle helps to hold the tool better. In addition to standard operating modes, there is a function for turning the bit.
- Power - 800 W
- Impact Strength - 3.2 J
- Weight - 3.45 kg
+ Pros Bison ZP-28-800 K
- cheap;
- powerful;
- not noisy;
- light enough for its power;
- conveniently lies in hands;
- smooth adjustment of the speed range;
- the two-component handle does not slip in the hand during prolonged use;
- 5 years warranty;
- the kit includes grease for the drill;
clear switching of operating modes - metal case;
- long cord.
- Cons Bison ZP-28-800 K
- It warms up, it is necessary to give a rest;
- poor-quality carrying case: from thin plastic, you need to remove the handle to get a punch.
Output. The warranty is 36 months from the date of sale, but this period applies only to household use of the instrument. For professional work with medium-intensity loads, the warranty is 12 months. The device is not suitable for high loads.
Bison ZP-32-1100 K
It works in three modes. Equipped with a reverse function for easy removal from the material when jamming the drill. Network cable - 4 m, you can freely move around the work site without the use of extension cords. For more accurate operation, a depth limiter is installed.
- Power - 1100 W
- Shot Power - 3.4 J
- Weight 3.4 kg
+ Pros Bison ZP-32-1100 K
- powerful;
- rubber cord of good length - 4 m;
- vibration in the handle almost does not give;
- the weight is not small, but does not break out of the hands when drilling;
- enough power to drill without tension;
- 5 year warranty;
- included jar with lubricant for the drill.
- high quality of assembly, material of manufacture and gear;
- Nice modern design.
- Cons Bison ZP-32-1100 K
- during the chiselling mode heats up very much;
- strong smell of burned plastic during the first work;
- The rod-regulator of drilling depth goes tight when moving in the socket, blocking access to the mode switch, if the handle is in the lower position.
Output. A good punch capable of working for a long time if you do not overdo the load. The tool is more suitable for occasional use.
Interskol P-22 / 620ER
It works in two modes - conventional drilling and drilling with chiselling. There is a reverse, safety clutch, electronic speed control. Includes an extra pen. A depth gauge is provided. For convenient long-term use, there is a power button lock function.
- Power - 620 W
- Impact Strength - 2.2 J
- Weight - 2.5 kg
+ Pros of Interskol P-22 / 620ER
- hardy, durable;
- powerful and reliable;
- convenient in work;
- rubberized handle;
- case included;
- lightweight and compact;
- long cord.
- Cons Interskol P-22 / 620ER
- weak spot - button for speed control;
- low quality plastic, there is a pungent odor;
- uncomfortable handles;
- the cord is thick;
- the case is too compact, it is difficult to lay the wire;
- no grooving mode;
- heats up.
Output. The hammer drill is suitable for home repairs. Lightweight, drills fast. On floor slabs, concrete and brick walls, it manifests itself well. There is enough power to work with any concrete. Vibration within reason.
The best punchers of Russian brands with a vertical arrangement of the engine
Vertical, or barrel, the puncher has a more complex structure. The engine is mounted perpendicular to the axis of the drill, and torque is transmitted to the motor shaft through the gearbox. Such devices are more powerful than horizontal ones and have a pneumatic type impact mechanism.
Many vertical type rotary hammers belong to professional tools. The design of such devices provides a more efficient air cooling system, so they can work longer without overheating.
The disadvantage of this design is a lot of weight. Hands get tired if you hold a perforator canopy.
Among the instruments of Russian production there are many high-quality and powerful instances, you will learn about some of them below.
 |  |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Bison ZPM-40-1250 EVK | Caliber EP-870/26 | Bison ZPV-30-900 VK | Whirlwind П-1200к-м | |||||||
| Maximum impact force, J | 10 | 4,5 | 4,2 | 9 | ||||||
| Power, W | 1250 | 870 | 900 | 1200 | ||||||
| Impact rate, bpm | 1400 - 2800 | 0 - 4450 | 2800 | 0 - 3750 | ||||||
| Spindle speed, rpm | 250 - 450 | 0 - 930 | 750 | 0 - 742 | ||||||
| Weight | 6,8 | 5,8 | 4,9 | 8 | ||||||
Bison ZPM-40-1250 EVK
The rotary hammer has two modes: drilling with impact and impact. Suitable for harsh environments. Thanks to the SDS-MAX cartridge, you can use professional-grade equipment and quickly change it in the process. It is delivered in a case for convenient storage and transportation.
- Power - 1250 W
- Impact Strength - 10 J
- Weight - 6.8 kg
+ Pros Bison ZPM-40-1250 EVK
- powerful, convenient;
- profitable price;
- vibration protection;
- network indicator;
- case of good quality;
- Magnesium alloy gear housing perfectly dissipates heat;
- can be used as a jackhammer;
- 5 year warranty.
- Cons Bison ZPM-40-1250 EVK
- with vertical work, hands quickly get tired due to the large weight;
- there is no way to rotate the chisel in the cartridge.
Output. The tool is quite suitable for heavy professional use.
Caliber EP-870/26
The rotary hammer operates in three modes. Equipped with a powerful shock mechanism, which increases work efficiency. The metal case of the gearbox helps to maintain the operability of the tool for a long time.
- Power - 870 W
- Impact Strength - 4.5 J
- Weight - 5.8 kg
+ Pros Caliber EP-870/26
- small, light;
- powerful enough;
- cheap;
- hammering, drilling, interferes with the solution;
- convenient to store in a case;
- good impact force, convenient to use as a small jackhammer;
- the kit has everything you need to get started: lubrication, an additional cartridge (clamping), a set of nozzles, spare brushes for the engine.
- Cons Caliber EP-870/26
- no button lock
- basks in the lowest part of the engine (where the brushes are);
- there is no drill chuck, although there is a place in the case for it;
- cartridge weak point - Boers sometimes pop up;
- flimsy switches, you need to get used to it.
Output. During operation, the hammer must not be heavily overloaded and allowed to cool. Good for home use. Before the first use, check the assembly - the power button may not be inserted into the grooves or there is an option for some other minor flaw that is easy to fix on your own.
Bison ZPV-30-900 VK
The hammer has a sufficiently high impact energy, which allows you to make holes even in the hardest materials. Anti-slip handles provide ease of use and secure grip in the hands. There is a safety clutch; it protects against overloads when the tool is jammed.
- Power - 900 W
- Shot Power - 4.2 J
- Weight - 4.9 kg
+ Pros Bison ZPV-30-900 VK
- device power;
- impact strength;
- the price is lower compared to peers;
- 5 year manufacturer's warranty;
- good cord length;
- vibration is poorly transmitted;
- rubberized handle fits comfortably in the hand;
- long and soft network cable;
- not heated;
- there is an indicator of wear of the brushes;
- safety clutch when jamming.
- Cons Bison ZPV-30-900 VK
- for use at home is too big and too heavy;
no reverse; - poor equipment;
- noisy (due to gear).
Output. Concrete drills beautifully. Boers do not drop out of the cartridge. There is vibration, but at a minimum. It is convenient to work as a jackhammer, this is a plus of the large mass of the device. However, because of this, it is not very convenient to drill holes in the ceiling, especially if you need to hold the hammer with one hand. The presence of the SDS-plus cartridge makes it possible to quickly replace equipment with one hand.
Whirlwind П-1200к-м
The hammer drill copes with its task when drilling holes in stone, concrete, brickwork. The modes of chiselling and drilling with a blow significantly increase the productivity of the tool. The model is distinguished by high impact force and a powerful electric motor. The front handle rotates 360 degrees, the rear dampens vibration during operation.
- Power - 1200 W
- Shot Power - 9 J
- Weight - 8 kg
+ Pros Whirlwind P-1200k-m
- easy to use tool
- nice to hold in your hands;
- reliable and durable cartridge for fixing;
- there is a regulator for switching operating modes;
- electronic adjustment of impact frequency;
- the presence of grooving and drilling modes;
- high impact force;
- dust protection provided;
- the presence of vibration protection - vibration is not felt during operation;
- good price / quality ratio;
- heats up a little.
- Cons Whirlwind P-1200k-m
- too heavy;
- no adapter from SDS MAX to SDS included.
Output. In construction work, the tool proved to be excellent. It hollows through holes for the withdrawal of sewage in the foundation blocks, cuts the floor slabs, breaks the curb into pieces, it is convenient to hollow out niches in the walls. You can work for a long time.
