Tile cutter is an indispensable tool for the tiler, used to trim tiles when bypassing protruding elements or to adjust its size. We have compiled a rating of the best manual tile cutters, suitable for a small amount of work, and top electrical models, which will help you choose a reliable machine that meets the challenges ahead. The rating is based on the technical characteristics and capabilities of tile cutters, as well as customer reviews.
Best Hand Tile Cutters
Manual tile cutters are driven by the power of a craftsman. They implemented a mechanical control type, consisting of a stand with a fault, a carriage, guides and a lever. The cutting element is a roller, which the operator presses along the ceramic blank.
As a rule, a manual tile cutter is capable of cutting tiles from 4 to 12 mm thick. Especially strong models are designed for 13-16 mm. The tool is independent of electricity and can be worn on a table or on the floor; it is convenient for transportation and storage. But to cut such a tile cutter you get only straight lines at a right or oblique angle.
 |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Gigant TC 500 | STAYER PRO 3318-50 | Anchor 400mm 1/6 3660 | |||||||
| Weight, kg | 7,85 | 5 | 2 | ||||||
| Cutting length mm | 600 | 500 | 400 | ||||||
| Cutting depth mm | 12 | 16 | 6 | ||||||
| Outer diameter of the roller, mm | 22 | 22 | 15 | ||||||
| Inner diameter of the roller, mm | 6 | 6 | 6 | ||||||
Gigant TC 500
Mechanical tile cutter from the Russian brand. It has a roller with a diameter of 22 mm and is able to cut ceramics up to 12 mm thick. The outdoor area allows you to place tiles 600 mm long.
+ Pros Gigant TC 500
- Reinforced design to withstand high loads.
- The ergonomic handle with rubber grip is comfortable to hold and push.
- Comes with a case, which is practical for storage and frequent transportation.
- Included are two angles for measuring the angle and width of the cut.
- Powerful ball bearing withstands a large number of cycles.
- The cutting roller is tungsten coated.
- The marking on the bed helps to quickly set the size without tape measure.
- Flat cut, because the carriage slides without play.
- Rollers are suitable from other manufacturers.
- Cons Gigant TC 500
- For some users, the video is quickly dull.
- The plastic of the case is cast unevenly: sometimes thick, sometimes very thin.
- The range of the tile cutter is initially not perpendicular and needs to be adjusted (held by two screws).
- The clasps on the suitcase are poorly fixed.
Output. This is a good tile cutter for self-repairing a house with laying tiles in the bathroom, in the kitchen and in the hallway. The device will withstand numerous cuts and cope with a material thickness of up to 12 mm.
STAYER PRO 3318-50
A model from a German manufacturer with a platform for placing tiles up to 500 mm long. The tile cutter is equipped with a 2 mm thick roller that provides accurate cuts.
+ Pros STAYER PRO 3318-50
- The handle with protrusions under the fingers contributes to a strong hold.
- Engraved scale for marking with the possibility of rotation for oblique cuts.
- The carriage with bearings has an easy ride and will last a long time.
- Reinforced platform with stiffeners.
- Suitable for tiles made of any materials.
- There are no roundings and chips on the edge after the cut, it is convenient to break the tile.
- Cons STAYER PRO 3318-50
- When working with a tile cutter, during pressing, it slides on the surface because it does not have rubber pads on the back side.
- There is a backlash on the bearing assembly that interferes with most users.
- The handle can be rotated and it will have to be put on glue.
- The line is not accurate - you need to do the markup yourself with a tape measure.
- The color of the case may be different (yellow and blue come across).
Output. it manual tile cutter for extremely thick ceramic flooring. It is designed for a cutting depth of up to 16 mm and is suitable for cutting porcelain stoneware, glass and other similar materials.
Anchor 400mm 1/6 3660
Model for a small tile measuring 400x400 mm. It has a 1.5 mm thick roller with a cutting depth of up to 6 mm.
+ Pros Encore 400mm 1/6 3660
- Rubber pads prevent the ceramic material from slipping during cutting.
- The platform already has holes for stationary fixing.
- Stainless steel guides for easy running and evenness.
- Cuts through a thickness of 6 mm the first time.
- Replacement rollers are suitable from other manufacturers.
- Cons Ankor 400mm 1/6 3660
- The scale on the body is poorly visible and not accurate - for a tight fit of the tiles, the marking will have to be done manually with a tape measure and marker.
- An inconvenient ball handle that you have to hold on to wiring the cutter.
- Very light (2 kg), so it constantly fidgets during work - you need to choose a stationary place and fasten the platform to the base.
- It is delivered in a paper box and there is nothing to transport or store it in.
- The skids must be lubricated before use.
Output. One of the cheapest manual tile cutters. Due to its very simple design, it is suitable for a very small amount of work - for example, to lay tiles in the bathroom. Its price will more than pay off by self-laying without the involvement of a specialist. A great choice for a beginner to learn the subtleties and then choose a good model for a more global repair.
Top electric top engine models
Electric tile cutters are very productive and suitable for a large amount of work when you have to lay tiles on 50 m2 and more (corridors of office buildings, shower rooms in hotels, pools). This tool is definitely for professional use in construction teams.
Top engine models are the most powerful. They are also comfortable thanks to the base and legs, which are equipped, so they do not need a table and you can work at a comfortable height, and not on the floor. A motor with a disk moves along a beam or is fixed permanently, and a platform drives under them.
The cutting element is a diamond disk, driven by an electric motor from a 220 V network. The models have water cooling, which facilitates long operations without interruption. At the same time, it eliminates dust. The disc is allowed to make straight and oblique cuts, as well as to be sawn into the middle of the tile to prepare holes for sockets, switches and pipes. Rating of electric tile cutters will help you choose a proven device with good features that will not fail and will last a long time.
 |  |  |  | |||||||
|---|---|---|---|---|---|---|---|---|---|---|
| DeWALT D24000 | FUBAG Masterline 6 Star - 660 | Husqvarna TS 66 R | RUBI DU-200 EVO 55903 | |||||||
| Weight, kg | 32 | 40 | 41 | 22,5 | ||||||
| Diameter of a disk, mm | 250 | 200 | 200 | 200 | ||||||
| Spindle speed, rpm | 4200 | 2800 | 2800 | 2915 | ||||||
| Power, W | 1600 | 800 | 800 | 800 | ||||||
| Cutting length mm | 610 | 660 | 660 | 650 | ||||||
| Water cooling |  |
|
|
|
||||||
DeWALT D24000
Powerful American electric tile cutter with 1600 Watt motor. The cutting disc is fixed stationary, and the lower platform is movable, which moves along with the material being cut by 610 mm in length.
+ Pros of DeWALT D24000
- The mobile platform on six rollers provides a good weight distribution of the workpiece and a stable position.
- The rubber splash guard on the back of the protective cover will neutralize the splash from water cooling.
- There are two stops for cutting at 45 degrees without preliminary marking.
- The spindle rotates at 4200 rpm.
- There are lateral and rear water collectors to collect it as much as possible from the receiving tank.
- The saw part changes the angle of inclination.
- The stainless steel guide system is corrosion free.
- There is a mortise feed for cutting holes for sockets and communications.
- Cons DeWALT D24000
- The cost is one of the highest - from 70,000 rubles.
- It takes up a lot of workplace - you need to allocate part of the room for it, so that it is convenient to bring and fold the trimmed materials.
- Loud engine operation - you need to choose the time to work so as not to interfere with your neighbors and put on your own headphones.
- Stand (4 legs) sold separately from the table.
Output. This is one of the most expensive tile cutters. It should be chosen for work with thick materials. He will cope not only with wall or floor tiles, but also with finishing panels and bricks thanks to a cutting depth of 95 mm.
FUBAG Masterline 6 Star - 660
German tile cutter with assembly in China. It has an engine power of 800 watts and is capable of cutting a depth of up to 40 mm at right angles. The drive disc moves along the bracket above the workpiece and cuts a length of 660 mm.
+ Pros of FUBAG Masterline 6 Star - 660
- Designed for marble, tile, plain and mosaic tiles, granite.
- The entire vertical frame can be tilted to the left to make the cut at an angle - this is useful for beautiful decoration of the walls at the corners of the partitions without involving additional decorative elements.
- The base plate moves for transversely for oblique cuts.
- Comes with four legs that detach for compact storage and transportation.
- There is no beating or knocking during cutting.
- The motor is axially adjustable.
- With proper operation (post-work treatment, lubrication, etc.), it serves more than 8 years.
- Cons FUBAG Masterline 6 Star - 660
- Dangling water hose.
- Poor attachment of the pump, which can be broken off if not handled during connection.
- Mild steel bolts are used in the construction - they can be rolled up when tightened.
- Quickly peeling paint on the body.
- There is a creak of bearings.
- Low side of the platform - a lot of water overflows through it and falls on the floor.
- Tight spring when releasing the carriage.
Output. The advantage of this electric tile cutter is its price. The model is sold at a price several times cheaper than analogues. It is optimal to buy it for a finishing master who goes to a new level of volumes - a tile cutter will cover all the needs for work and will not greatly draw money from the budget.
Husqvarna TS 66 R
Electric tile cutter from the Swedish brand. Able to cut 660 mm long with a depth of 40 mm. Cuts stone, ceramics and tiles. Equipped with a system for changing the angle of the bracket with a saw blade.
+ Pros of Husqvarna TS 66 R
- Smooth cut, almost without bevelling.
- A vertical stroke of the cutting element is provided for sawing in the middle of the tile and making holes for communication.
- No lateral cuts even on long cuts of 600 mm.
- Stable construction does not stagger during operation.
- The exact stroke of the carriage.
- Soft start of the motor.
- Cuts fast with original discs.
- Cons Husqvarna TS 66 R
- A small mudguard - part of the stream scatters outside the table.
- Heavy and uncomfortable to wear yourself.
- At the end of the cut, you need to act carefully - with quick guidance, it cleaves the corner.
- Gradually rust the table and nuts.
- The power button on the case, and not on the handle - is not convenient.
- The pump is sensitive to water quality - when dirty it starts to pump worse.
- No instructions in Russian.
Output. it a good tile cutter, not only for cutting ceramic tiles and porcelain tiles, but for the construction of fireplaces, stoves and barbecue. A powerful 800 W motor and a diamond disk cut through a brick then40 mm thick and can easily cope with various decorative tiles. The screwed-on legs will allow you to organize a workplace in any corner.
RUBI DU-200 EVO 55903
Tile cutter with 800 W motor power and the ability to cut through depths of up to 35 mm. Cut length reaches 650 mm. The device weighs 22 kg, which is convenient for transportation by one person.
+ Pros of RUBI DU-200 EVO 55903
- Possibility of folding for compact transportation.
- Easy to replace dirty water thanks to a removable external tank.
- Accurate lateral emphasis with a scale for serial cutting without preliminary marking.
- Long life of the key unit due to direct drive of the engine.
- Able to cut tiles diagonally with dimensions of 450x450 mm.
- There is no beating on the carriage.
- Cutting porcelain stoneware 10 mm thick looks like a factory one.
- Cons RUBI DU-200 EVO 55903
- The carriage does not have a vertical stroke - cutouts for outlets in the tile cannot be made.
- Curved native disks come across.
- It is inconvenient to wash the pan - it is not removable and you can remove dirt from under it only with strong pressure.
- When the bed is contaminated, water begins to drain past the tank.
- The paint quickly scratches in places of contact with the tile.
- When cutting tiles longer than 600 mm, the second person needs to maintain the edge - the platform is not enough.
Output. This model is included in the rating of water-cooled electric tile cutters thanks to a separate liquid container and a U-shaped mudguard, which better prevents water splashing on the floor. Another advantage of the equipment is the presence of wheels and folding legs, which is suitable for frequent changes in the workplace.
The best electric bottom cutters
The lower position of the motor gives more compact dimensions. Such models are powered from a 220 V network and their drive is always stationary. The master himself needs to move the tile, which requires special care, but this allows you to make not only straight and oblique cuts, but even smooth the corners to a semicircular shape.
The equipment is equipped with water cooling to protect the cutting element and eliminate dust. They are used both for home repairs and for professional purposes.
 |  | |||||||
|---|---|---|---|---|---|---|---|---|
| Partner-Husqvarna TS 230 F | Diam ML-180/500 | |||||||
| Weight, kg | 16,5 | 7 | ||||||
| Diameter of a disk, mm | 230 | 180 | ||||||
| Power, W | 800 | 500 | ||||||
| Spindle speed, rpm | 2800 | 2950 | ||||||
| Cutting depth at an angle of 90 degrees, mm | 40 | 34 | ||||||
| Water cooling | |
|
||||||
Partner-Husqvarna TS 230 F
A professional model with a rubberized platform that provides reliable retention of the workpiece. The metal case adds weight and makes the equipment more stable. Spindle rotation at 2800 rpm promotes quick operation.
+ Pros of artner-Husqvarna TS 230 F
- High-quality assembly with a robust housing.
- Patented cutting system at any angle from 0 to 45 degrees.
- The metal parts are powder coated in the oven for long-term corrosion resistance.
- Efficient water cooling system.
- Durable and accurate aluminum rail.
- The table is removed, so inside the container is easy to clean after work.
- Quietly cuts without vibration.
- Cons artner-Husqvarna TS 230 F
- The equipment is designed to work both on the floor and for installation on legs (folding goat), but they are sold separately.
- Sometimes there is a deviation on the side stop of 1 mm - you have to put a washer under it for alignment.
- A small-capacity water bath is quickly consumed and contaminated, so you often need to change the water.
Output. Despite the lower engine position, this tile cutter is a good option for professional activities. A powerful 800 W motor ensures fast cutting of tiles up to 40 mm thick. The polygonal emphasis from the kit will help you to cut various configurations to bypass the pipe, skirting board or other elements.
Diam ML-180/500
Tile cutter with a lower engine from a Russian manufacturer. It has a disc with a diameter of 180 mm and a motor power of 500 watts. The working platform has no limiter, so you can cut tiles of any size.
+ Pros of Diam ML-180/500
- Two rulers with a scale are built into the table, which allows you to cut exactly to the size without preliminary marking.
- The base tilts to the side for cutting at an angle of 45 degrees.
- Rubber underlay is provided from below so that the equipment does not move away from vibration.
- It is quiet.
- It is not difficult to transfer to another place due to the low weight.
- Can be installed on any table or perform operations on the floor.
- Cons Diam ML-180/500
- The plastic case does not rust, but less durable.
- Sometimes sold without a disc - you need to clarify.
- A lot of water on the floor - the platform has no sides.
- A plug is poorly inserted in the bottom to drain the fluid.
- The massive casing closes the view.
Output. This is the best choice for home repairs, to lay tiles in the bathroom, kitchen, on the doorstep of a private house, etc.The model is useful for those who are too lazy to mess with a mechanical tile cutter and want to work in comfort.
